<![CDATA[L&J is a professional vertical integration supplier and solution provider in rubber industry.]]>https://www.lj-international.com.tw/en/product.rss <![CDATA[Long Effective ACM (Acrylic Rubber)]]>https://www.lj-international.com.tw/en/product/001_long-effective-acm.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

As rubber manufacturers know, once ACM is compounded by adding accelerator which is ready for curing process, its effect cannot last for one more week and its shrinkage rate is changing day by day so usually is hard to be controlled in production.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Silicone Cooling Sheet]]>https://www.lj-international.com.tw/en/product/002_silicone-cooling-sheet.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

This is another example which we study Silicone as the material of cooling sheet used in electronic components.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Customized Specification]]>https://www.lj-international.com.tw/en/product/003_customized-specification.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

L&J is able to design formula to fit specific compound property requirements.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Compression Cavity Mold]]>https://www.lj-international.com.tw/en/product/004_compression-cavity-mold.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

Basically compression cavity mold is used for production of oil seal or some kinds of circular rubber part with suitable structure to make. We have good facility in mold-production, design and measurement.


Linda & Jason International Co., Ltd.]]>
<![CDATA[High-Precision Compression Molding]]>https://www.lj-international.com.tw/en/product/005_compression_mold.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

Compression molding process is directly arranging rubber strip above cavity then close mold plate to proceed molding process. Besides the relative production parameters, the mold design focuses on how to have molding pressure spread averagely and how to deal with the going of waste rubber and exhausting air. Furthermore, less flash is always the essential requirement which depends on the design of cutting groove. With good design of cutting groove, not only flash can be easily erased manually, but also can produce good flash-less rubber parts. Cutting groove is also related to the mold life time. The selection of mold steel is an important consideration.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Transfer Injection Mold]]>https://www.lj-international.com.tw/en/product/006_transfer_injection_mold.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

Transfer injection molding process is arranging rubber strip on a chamfer mold plate, then leads the rubber flow into injection channel to fill up cavity averagely through compression molding process. The most common rubber part which uses this kind of mold design is valve stem seal or bonded seal. But anyway, L&J will give the best suggestion according to the structure of rubber part which you want to produce.


Linda & Jason International Co., Ltd.]]>
<![CDATA[High-Precision Custom Rubber Injection Molds]]>https://www.lj-international.com.tw/en/product/007_injection_mold.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

L&J International has been specializing in high-precision rubber injection molds since 2006. Our advanced flash-free injection molding process ensures minimal material waste while maintaining superior product quality.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Present Specification in Stock]]>https://www.lj-international.com.tw/en/product/008_present-specification-in-stock.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

L&J has some existing oil seal specification in stock which can afford the small quantity purchase order.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Custom International Standard size O Ring and X Ring]]>https://www.lj-international.com.tw/en/product/012_international-standard-size-o-ring-and-x-ring.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

L&J specializes in manufacturing high-quality rubber O-Rings and X-Rings, fully compliant with international standard sizes to meet diverse industrial sealing needs. We offer a complete range of O-Rings following global standards, including:1.AS568 Standard Rubber O-Rings & X-Rings – Widely used in North America and global industries 2.JIS G Standard Rubber O-Rings – Designed for Japanese industrial applications 3.JIS P Series Rubber O-Rings – Precision sealing solutions for various machinery 4.JIS S Standard Rubber O-Rings – Engineered for superior sealing performance


Linda & Jason International Co., Ltd.]]>
<![CDATA[O Ring Kits]]>https://www.lj-international.com.tw/en/product/013_o-ring-kits.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

O Ring kit is a specific combination of different O Ring size which is collected for specific applications.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Customized O Ring]]>https://www.lj-international.com.tw/en/product/014_customized-o-ring.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

This is a special O Ring product range which L&J work for OEM or customized requirements.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Gasket and Packing]]>https://www.lj-international.com.tw/en/product/015_gasket-and-packing.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

Well molding quality with flash less, tool mark less and easily to be trimmed manually.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Boots and Bush]]>https://www.lj-international.com.tw/en/product/016_boots-and-bush.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

Well molding quality with flash less and easily to be trimmed manually.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Customized Design of Rubber Parts]]>https://www.lj-international.com.tw/en/product/018_customized-design-of-rubber-parts.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

This is what L&J is good at. Here we would like to introduce some special cases we produced for customers in practice.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Oil Seal Trimming & Inspection Machine]]>https://www.lj-international.com.tw/en/product/019_oil-seal-trimming-and-inspection-machine.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

The main cooperation between L&J and G-Way is that L&J is the mold supplier to G-Way and G-Way is the source and consultant of rubber trimming & inspection machine to L&J so they make up to each other in coordination and provide & share resources.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Rubber Accessory Processing Machine]]>https://www.lj-international.com.tw/en/product/020_rubber-accessory-processing-machine.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

L&J sells two kinds of rubber accessory processing machine : one is SEAL ADHESIVE APPLYING DEVICE MACHINE and the other is SEAL SHELL AIR-DRY ROTARY MACHINE. In the future, we will continuously develop other new items for customers.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Engineering Plastic]]>https://www.lj-international.com.tw/en/product/021_engineering-plastic.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

L&J supplies engineering plastic for customers as a kind of engineering material to different industrial machining application.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Die Casting Molds and Parts]]>https://www.lj-international.com.tw/en/product/022_die-casting-molds-and-parts.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

From the past experience, L&J has good ability in developing die casting molds and parts for customer. The working factory are located in middle Taiwan and quality always obtains much favor from Japanese, India, and Middle East customers. The following pictures are examples which L&J once made.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Motorcycle Chain and Industrial Chain]]>https://www.lj-international.com.tw/en/product/023_motorcycle-chain-and-industrial-chain.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

In the earlier stage, L&J tried to expand business to motorcycle components. The best items which L&J has built up with a very good foundation is roller chain. It is divided into 2 fields: Motorcycle Chain and Industrial Chain.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Compression Molding Machine (TYC)]]>https://www.lj-international.com.tw/en/product/024_compression_molding_machine_tyc.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

The main cooperation between L&J and TY is that L&J is the mold supplier to TY and TY is the source and consultant of rubber machine to L&J so they make up to each other in coordination between mold and rubber machine and provide & share resources.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Compression Molding Machine (THP)]]>https://www.lj-international.com.tw/en/product/025_compression_molding_machine_thp.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

The main cooperation between L&J and TY is that L&J is the mold supplier to TY and TY is the source and consultant of rubber machine to L&J so they make up to each other in coordination between mold and rubber machine and provide & share resources.


Linda & Jason International Co., Ltd.]]>
<![CDATA[Rubber Injection Molding Machine]]>https://www.lj-international.com.tw/en/product/026_rubber_injection_molding_machine.html Sat, 03 May 2025 04:29:15 +0800 by Linda & Jason International Co., Ltd.

The main cooperation between L&J and TY is that L&J is the mold supplier to TY and TY is the source and consultant of rubber machine to L&J so they make up to each other in coordination between mold and rubber machine and provide & share resources.


Linda & Jason International Co., Ltd.]]>